INSTALLATION FITMENT NOTES

Pivot Pegz Mount Spring Fitment

The picture below shows the correct configuration for fitment of the left and right Mount Springs to all Pivot Pegz models.

Note: The spring legs lean against the motorcycle frame and are compressed when the pegs are moved into position and the pins are inserted. The springs legs do not insert into the spring hole in the frame, if one existed with your standard factory issued springs. (Rubber bands are for display purposes only and are not to be fitted to the motorcycle).

Special Fitment Note for KTM 2000-2001 LC4 640:

It is possible to fit Pivot Pegz PP-19MK3 to 2000-2001 KTM LC4 640’s however you'll need to upgrade the left-hand OEM KTM footpeg bracket to KTM part # 58403038100 FOOTREST BRACKET LEFT ALU 05. The bracket is a genuine KTM aluminum footpeg bracket from a 2005 640 Adventure and can be purchased via you local KTM dealer. You will also need to purchase the bracket mounting bolts and a left hand footpeg pin at the same time because the old mounting bolts and footpeg pin are too short. Once you have fitted the new bracket your bike will now have the same footpeg mounting design as the 2005-2010 LC4 and Pivot Pegz part # PP-19MK3 will fit.

BACK TO PREVIOUS PAGE